Tel: +971 (0) 4 368 2911Fax: +971 (0) 4 368

Regions CoGri operate in

  • Australian-Flag
  • Belgian Flag
  • Canadian flag
  • Chinese-Flag
  • French-Flag
  • German-Flag
  • Greek-Flag
  • Indonesian flag
  • Italian-Flag
  • Luxembourg flag
  • Malaysian-Flag
  • Dubai-Flag
  • Netherlands flag
  • New-Zealand-Flag
  • Singaporian Flag
  • South-African -Flag
  • South-Korean-Flag
  • Spanish-Flag
  • UK Flag
  • USA Flag
Floor Upgrades - Laser Grinder ® - Wheel Track Grinding


Our philosophy is to grind the minimal amount of concrete that is needed to produce the maximum benefit for the end user.

The Laser Grinder® is easily adapted to grind all the essential wheel paths.

Laser Grinding for a 3 Wheel Very Narrow Aisle (VNA) Truck

As a minimum requirement, any restorative grinding for a 3-wheeled VNA forklift truck must upgrade the floor flatness to the specified tolerances in the front (left & right) load wheel tracks. Grinding all 3 wheel paths assures that each wheel of the VNA truck follows a similar profile, providing speedier operations and high-level pallet movements to be carried out safely.

Laser Grinder ® is easily adapted to grind 2 or 3 wheel paths to any required flatness tolerance. The left and right tracks are carried out simultaneously, in one pass along an aisle, and the centre track can be created by making a second pass.

Laser Grinding for a 4 Wheel VNA Truck

Remedial grinding for a 4-wheeled VNA forklift truck should guarantee that all 4 wheels are accommodated inside the ground paths.

For both 3 or 4 wheeled VNA trucks, the ground paths are commonly 300mm or 380mm wide, depending on the width of the truck wheels. Wider ground paths can be accomplished by making another pass along the aisle.

The base of each ground path is flat across its width, with enough clearance for each side of the truck wheel.
Find out more about the CoGri Group
Click images to see larger
Find out more about "Superflat" High Tolerance Floors
Floor Upgrades - Laser Grinder ® - Wheel Track Grinding